Cembrit Cladding

Cembrit Acrylic Cladding Paint should be used to reseal cut edges on the Cembrit Plank with a its high-quality 100% acrylic latex paint before installation. Cembrit Cladding Paint is factory primed, a finish coat should be applied within 6 months of installation. available in four colours, pure white, seaform, granite grey and anthracite grey.

Cembrit Cladding Drip Profile 20x30x25mm provides a long-lasting finish, allowing water to be directed away from the structure. To maintain the plane of the facade it is advised to cut a 30mm fillet from a plank. For proper ventilation, leave a minimum of 10mm distance to adjacent surfaces. Available in colours agate grey and anthracite grey.

Cembrit Cladding End Profile 20x40mm coloured aluminium profile is perfect for vertical finishing. It is an essential piece of cladding equipment that hides sharp edges as well as protects them from wear and tear. Available in colours agate grey and anthracite grey.

The Cembrit Cladding External Corner 25x35x35mm can be used to provide protection on external corners and for stop profile applications. It's also perfect for ensuring a neat, tidy finish. Available in colours agate grey and anthracite grey.

Cembrit Cladding Horizontal Trim 40x50x40mm allows for an easily obtained finish around windows and doors. It is advised that there must be a minimum of 10mm clearance from the planks and framing structure to horizontal profiles, allowing proper water drainage. Available in colours agate grey and anthracite grey.

The Cembrit Cladding Internal Corner 20x35x35mm is designed to finish internal corners by forming a seal between the trim and the corner. Available in colours agate grey and anthracite grey.

Cembrit Cladding Plank 180mm x 8mm x 3.6m is the ideal alternative to timber weatherboarding, but does not require preservative treatment and is not susceptible to fire. Available in colours granite grey, seaform, pure white and anthracite grey.

The Cembrit Cladding Start Ventilation Profile 25x48mm is the first step to fixing your cladding. Once the starter profile is level and screwed/nailed into place, you can then begin to add the planks. The starter profile will ‘kick out’ the first plank to ensure the look is uniform with the rest of the installation.

Cembrit Cladding Vertical Trim 40x21x79mm allows for an easily obtained finish around windows and doors. It is advised that there must be a minimum of 5mm clearance with an option of sealing between the plank and the profile. Available in colours agate grey and anthracite grey.

Cembrit Colour Coded Cembrit Cladding Screws are 4.5 x 41mm and contain 50 within a box. For use with our coloured Cembrit Planks. Available in seaform, pure white, granite grey and anthracite grey.

Cembrit Colour Coded Cembrit Cladding Screws are 4.5 x 41mm and contain 50 within a box. For use with our Cembrit Cladding Planks.